S7 Cold working die steel
S7 steel is ASTM standard steel number, is heavy duty tool steel and medium carbon alloy steel. S7 die steel has high chromium content, good tempering resistance and high temperature oxidation resistance. In addition, the steel also has excellent wear resistance, excellent etching machining, excellent wire cutting and excellent impact toughness. After annealing and softening, the original microstructure of rolled bar is F+C and must be used after heat treatment.
S7 die steel round steel chemical elements % :
S7 steel plate C Si Mn Cr Mo V P/S
S7 thin plate 0.51 0.30 0.66 3.18 1.40 0.23 0.030
S7 die steel plate use:
S7 die steel steel bar is suitable for bearing heavy load die steel;
S7 mould steel module is suitable for thermosetting plastic mold, high temperature thermosetting plastic mold;
S7 die steel round bar is suitable for fixed and moving die inserts;
S7 die steel plate is suitable for cold stamping die with high wear resistance, high toughness and high hardness.
S7 mold steel material supply status and factory hardness:
S7 mould steel Steel rod/steel plate/round steel/round rod/steel/material/material/module supply state is annealing state, S7 factory hardness 200-225HBW
S7 die steel heat treatment hardness:
S7 die steel quenching temperature 850-880℃, oil cold or salt bath; The tempering temperature is 550℃ and the hardness of heat treatment is 54-58HRC
S7 steel physical properties | S7 mechanical properties | | S7 soft annealing specification S7 removing stress specification | | S7 quenching tempering specification S7 flame and induction hardening specification | | S7 nitride specification S7 soft nitriding process specification | | S7 tensile strength | S7 yield strength S7 elongation | S7 reduction of area | S7 impact toughness | | S7 compressive strength S7 | S7 thermal expansion coefficient thermal conductivity
